CWT Compact S2 Installation & Maintenance Manual
To empty the coin box, follow the 3 steps described below
Removing the coin box
1.Open the vault door with the appropriate key.
2.Turn the opening knob clockwise to the horizontal position. This closes the collection hatch and releases a catch that holds the box in position in the vault.
3.Pull the coin box out. A collection ticket will be printed.
| Warning: The coin box may be heavy depending on the amount of coins in it |
Emptying the coin box
1.Turn the collection lock clockwise with the appropriate key. The same key combination is usually used for all coin boxes.
2.Pull the emptying hatch out completely. This will empty the box of its contents and activate the internal mechanism.
3.Push the emptying hatch in. The hatch can be pushed back in only if it has previously been pulled out completely.
4.Turn the collection lock counter clockwise and remove the key.
Inserting the coin box
1.Insert an empty coin box.
2.Turn the opening knob counter clockwise to its vertical position. This locks the box into position in the vault and opens the collection hatch.
| Important: If the knob is accidentally turned to the horizontal position at this point, the box must be emptied as described in section 2 above before the knob can be returned to the correct position. |
3.Close the vault door. The opening knob must be in the vertical position for the door to be closed.
