CWT Compact S2 Installation & Maintenance Manual
Figure 17, Vault interior.
The coin box vault is made of 4 mm sheet metal with side drilling protection.
The vault door, made of 6 mm armoured steel, has six drilling protected locking latches along its edges.
The coin box vault door lock, placed inside a drilling protected and anti-bolster fitting, is of a high security mechanical type such as Kaba or any of the Abloy locks Guard-x, Exec and Protec. All of them use a key profile that can only be obtained from the original lock manufacturer. The key does not have any serrated surfaces neither any sharp or pointed edges. Registered locks and keys are available.
The key can only be removed when in the locked position. It is impossible to close the outer pedestal door until you have locked the vault door and removed the key.
When collecting the coins, you can pull out the coin box and let it rest on top of the vault door before you start lifting the box.
When open, the lowered vault door can easily be lifted away from the vault for repair or replacement. No tools are required for this.
Coin Box
Seen from outside in, the coin box is protected by the pedestal and the coin box vault.
Figure 18, Coin box.
