CWT Compact S2 Installation & Maintenance Manual

The given distances between fixed objects at the back and the sides of the terminal are minimum recommended distances:

•The distance behind the terminal enables easy handling while mounting the terminal and some vertical adjustment of the terminal. This distance is strongly dependent on GSM/GPRS reception and should be increased in poor situation.

•The distance at the left side ensures that the doors can be fully opened.

•The distance at the right side allows easy insertion of the door key and gives enough space if a locking mechanism needs to be repaired.

Figure 28, Terminal installation drawing

The above figure shows all the alternative mounting holes in the pedestals bottom plate. See Pouring a new concrete foundation regarding placing the terminal on a base anchor cast into a foundation.

A cable for connection to the power grid is drawn through the floor (from the floor below, for example) and into the pedestal through the opening in the mounting frame (optional). Alternatively, a hole can be drilled in the pedestal and the cables drawn in some other way. The cable must be protected against damage. Use proper cable bushing to prevent cable wear and moisture entry into the pedestal.