CWT Compact S2 Installation & Maintenance Manual

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Printable Version
Save Permalink URL

Card reader replacement

Replacing the card reader depends on the model installed.

Chip Card Reader

Chip card readers are often equipped with tamper switches on both the card reader and pin pad. Partly unscrewing the reader may already trigger the tamper switch making the reader useless. If this is the case, the reader must be sent back to the supplier to reset the switch.

Reference:
How to safely dismount and mount a reader is described in the reader's installation guide: e.g. 3C XENTEO ECO Mounting instructions CWT C with CPU board 0501-E0150

MagStripe readers

•Disconnect the cable

•Unscrew the reader

•Mount the new reader

•Connect the cable