CWT Software Configuration Handbook

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Printable Version
Save Permalink URL

Navigation: Introduction > Software used in the CWT

Loading the application on start-up

Important:
It is very important that the application, at system start, knows what type of user controls that are available in the terminal.

•If the empty file CdsSmallAppl.load is detected on the SD card at system start this indicates that the terminal is a CWT 2110 or CWT 2115.

•If the empty file cds104.load is detected on the SD card at system start this indicates that the terminal is a CWT 104 or CWT Compact Classic. If the empty file CdsCompactAppl.load is detected on the SD card at system start this indicates that the terminal is a CWT Compact.

•If the empty file CompactAveStn.load is detected on the SD card at system start this indicates that the terminal is a CWT Compact with an AVE board and STN display.

•If the empty file CompactAveTft.load is detected on the SD card at system start this indicates that the terminal is a CWT Compact with an AVE board and TFT display.

•If neither of the above files are present on the SD card this is interpreted as if the terminal is a CWT 2120.

Important:
Only one of these files shall be stored on the SD card, or the terminal may behave in an unexpected way or may not start at all.