CWT Software Configuration Handbook
| Element | Path: <cwt><CORE><interrupts><serialRingInterrupt> |
 | any change in the elem1ent or addition of an element |
Attributes
port
| Value: | Com3, Com4, Com5, Com6 |
| Description: | Serial port |
interrupt
| Value: | RisingEdge, FallingEdge, BothEdges |
| Default: | RisingEdge |
| Description: | Sets what edge on the signal will trigger an interrupt and also wake up the terminal. |
Note: if an RS232 transceiver is used (internal or external), the signal and consequently the edge is inverted.
Example:
<cwt><CORE ...>
<interrupts>
<serialRingInterrupt port="Com3" interrupt="RisingEdge"/>
<serialRingInterrupt port="Com4" interrupt="FallingEdge"/>
<serialRingInterrupt port="Com5" interrupt="RisingEdge"/>
<serialRingInterrupt port="Com6" interrupt="BothEdges"/>
</interrupts>
</CORE></cwt>
