CWT Software Configuration Handbook
Value Path: <cwt><PRINTER><ttp2030><attributes><attribute id="8" >
The print speed affects the print quality and the power consumption. Lower print speed results in better print quality and lower power consumption.
This table shows the available values and the corresponding speeds.
Value |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
mm per second |
47 |
48 |
49 |
50 |
51 |
52 |
53 |
55 |
57 |
61 |
65 |
70 |
77 |
86 |
96 |
107 |
123 |
136 |
150 |
| Note: Some settings result in printer chassis resonance causing increased noise and deteriorated print quality. |
To print in cold weather, please measure the temperature inside the cabinet and set the speed according to temperature.
Temperature |
Print speed value |
Print speed (mm/s) |
Presenter speed |
Temperature |
|---|---|---|---|---|
–10°C |
19 |
150 |
150 |
187.5 |
–15°C |
19 |
150 |
140 |
175 |
–20°C |
19 |
150 |
120 |
150 |
–30°C |
11 |
65 |
70 |
87.5 |
These setting alternatives are just guidelines based on the motor specifications. There is no guarantee that the printer will operate at the indicated temperatures.
use print speed
Value range |
Note |
|---|---|
True False |
Non default setting is used. See below. Recommended setting. Default setting (19) is used. |
Print speed value
Value range |
Note |
|---|---|
1 – 19 |
Recommended setting: 15 (= 96 mm/s). See table under 4.5.26. |
Example:
<attribute id="8" value="15" use="true" description="Print speed" min="1" max="19" />
