Value Path: <cwt><PRINTER><ttp2030><attributes><attribute id="34" >
Decides if the printer should cut after executing an FF command, or if it should just feed one page length.
Use auto cut after form feed
Value range |
Note |
|---|---|
True False |
Non default setting is used. See 4.5.23.2 below. Default setting (1) is used. |
Auto cut after form feed value
Value range |
Note |
|---|---|
0 1 |
No cut. Cut. Recommended setting. |
Example:
<attribute id="34" value="0" use="true" description="Auto cut after FF" min="0" max="1" />
