CWT Compact S2 Installation & Maintenance Manual
The door is fastened to the cabinet with an upper and a lower hinge pin. A spring helps pressing the pins into corresponding holes in the cabinet.
| Note: The procedure for the pedestal is the same as for the cabinet door replacement |
Removal
| Caution: The weight of the door is approximately 15 kg. |
1.Turn OFF the ticket terminal.
2.Disconnect all cables running between the door and the cabinet.
3.Ensure that the upper hinge pin’s locking screw (2 mm Allen key) is tightened.
4.Hold the door with a steady grip.
5.Loosen the lower hinge pin’s locking screw (2 mm Allen key) and push the screw with the attached hinge pin up and out of grip with the cabinet. Lock the hinge pin in this upper position.
6.Carefully pull the lower end of the door out and then lower the door to disengage the upper hinge pin from the cabinet.
Figure 43, The door hinge mechanism is the same om all models
Assembly
Follow the directions above in reverse order.
| Important: Loosen the lower hinge pin’s locking screw to let the hinge pin enter the corresponding hole in the cabinet. |
