CWT Compact S2 Installation & Maintenance Manual

Navigation: » No topics above this level «

Keyboard replacement

Removal

Warning:
When removing a chip card reader and pin pad you may trigger a tamper switch making the reader useless.
see Card reader replacement

1.Remove the display and its mounting frame.

2.Remove the coin system.

3.Remove the Card reader and pin pad

4.Remove the contact-less card reader

5.Remove two plastic printer outlet parts.

6.Remove the two screws on the cover for the piezo-button board.

7.Remove the plastic cover.

8.Disconnect the cables from the keyboards.

9.Remove the two screws holding the piezo-button board.

10.Remove the piezo-button board.

11.Remove the 20 screws holding the alluminium front plate.

12.Remove the keyboards. WARNING: The keyboard is mounted with very strong tape.

Assembly

Install in reverse order. Make sure that the gaskets on the keyboards are in the correct position.