CWT Software Configuration Handbook
Value Path: <cwt><PRINTER><ttp2030><attributes><attribute id="39" >
Specifies the length of the black mark in 0.125 mm steps. Measure the length of the black mark on your paper and enter that value.
Detected black areas 5 mm longer than the set value will be interpreted as paper out.
Default value: 50 (equal to 6.25 mm).
Use max black mark length
Value range |
Note |
|---|---|
True False |
Non default setting is used. See 4.5.19.2 below. Recommended setting. Default setting (80) is used. |
max black mark length value
Value range |
Note |
|---|---|
1 – 159 |
Min. black mark length in 0.125 mm steps. Recommended setting: 30 |
Example:
<attribute id="39" value="80" use="false" description="Max black mark length" min="1" max="160" />
