CWT Software Configuration Handbook
Value Path: <cwt><PRINTER><ttp2030><attributes><attribute id="40" >
Specifies the minimum length of the black mark (in paper feed direction) in 0.125 mm steps. Shorter marks are ignored. The default value of 30 equals 3.75 mm.
Use min. black mark length
Value range |
Note |
|---|---|
True False |
Non default setting is used. See 4.5.18.2 below. Default setting (24) is used. Recommended setting. |
Min. black mark length value
Value range |
Note |
|---|---|
1 – 159 |
Min. black mark length in 0.125 mm steps. Recommended setting: 24 |
Example:
<attribute id="40" value="24" use="false" description="Min black mark length" min="1" max="159" />
