Please enable JavaScript to view this site.

CWT Software Configuration Handbook 4.40

Value        Path: <cwt><PRINTER><ttp2030><attributes><attribute id="49" >

Selects if the cut command should cut at the current paper position or if the command should include paper advance before the cutting occurs.

Set to 1 if the printer is used in text mode and 0 if it is used from a driver that takes care of this in the driver.

Note:
The paper is advanced before the FF command calculates the page length. This is to see if the page length exceeds the set minimum page length.

Use advance before cut

Value range

Note

True

False

Non default setting is used. See 4.5.12.2 below.

Default setting (0) is used.

advance before cut value

Value range

Note

0
 

1

Cut after paper advance. The advance distance is controlled by the CWT software. Recommended setting.

Automatic distance calculation. This means advancing the paper with 9 mm equal to the head-to-cutter distance.

Example:

<attribute id="49" value="0" use="true" description="Advance before cut" min="0" max="1" />