Value Path: <cwt><PRINTER><ttp2030><attributes><attribute id="48" >
Sets the width of the printable area as shown below. This attribute can also be used to achieve left and right margins on the printed ticket. If you for instance use a 58 mm wide paper and set the printing width to 48, you will get a 5 mm margin on both sides of the paper.
Figure 10. Printing width.
Use printing width
Value range |
Note |
|---|---|
True False |
Non default setting is used. See 4.5.13.2 below. Recommended setting. Default setting (0) is used. |
printing width value
Value range |
Note |
|---|---|
0 1 – 72 |
Sets width as detected by sensor (54 or 72 mm). Recommended setting: We recommend you to set a somewhat narrower printing width than the width of the loaded paper to allow the paper to wander a bit sideways without losing print. |
Example:
<attribute id="48" value="50" use="true" description="Printing width" min="0" max="72" />
