Show/Hide Toolbars

CWT Compact S2 Installation & Maintenance Manual

Navigation: Installation > Installing the terminal > Installing a modem

Checking modem contact with network provider

Scroll Prev Top Next More

To check the connection:

1.Switch ON the terminal.

2.Check the LED status indicators on the modem.

 

LED Status indicator

 

Figure 37, location of the LED status indicator

Figure 37, location of the LED status indicator

The LED indicator is located next to the upper right corner of the Modem processor.

RED        Registered in the GSM network. Should always be ON.

YELLOW        Connected to the GPRS network. Should always be ON.

GREEN        Connected to GPRS network and ready to communicate with the WebOffice gateway.

The LED will be turned off when the modem it powered off. If no LED is lit and the modem is powered on the SIM is not valid or an incorrect PIN code has been entered in the terminal configuration.

 

Blinking pattern

10 ms on / 1990 ms off        Modem has an active PPP-connection (GPRS and UMTS) and is ready to communicate.

10 ms on / 3990 ms off        Modem registered to a network. No call, no data transfer active.

500ms on / 500 ms off        Limited Network Service (e.g. because no SIM, no PIN or during network search)