CWT Compact S2 Installation & Maintenance Manual
The yellow status indicator 
has several functions.
| • | If printer firmware 3.82 is used the status light is constantly on when the printer is operational. With printer firmware 4.1 the status light is constantly turned off as long as the printer is operational and there are no errors. This change has been introduced to save power |
| • | Flashing rapidly — Indicates an error. Hold down the feed button and the number of blinks will reveal the type of error. |
The Error indication is reset
| • | When the error condition is removed. |
| • | The Next time the power is switched ON. |
| • | When the print head is lifted and then lowered. |
No. of blinks |
Error |
|---|---|
1 |
Presenter jam. Paper cannot be ejected or retracted. |
2 |
Cutter cannot return to home position. |
3 |
Out of paper. |
4 |
Print head lifted. |
5 |
Paper feed error (below print head). |
6 |
Print head temperature exceeds 60 °C. |
7 |
Presenter jam. Motor cannot rotate. |
8 |
Paper jam during retract. |
11 |
Black mark calibration error. |
Rapidly flashing |
Checksum error during firmware loading. |
Steady light |
Wrong firmware type or target detected at firmware loading. |
2 blinks – pause – – 2 blinks |
Paper low. |
