To be able to work with the Tariff Editor you must have one terminal up and running with a default Tariff Package that can be uploaded to WebOffice.
You can start with a clean sheet even if you already have terminals installed.
To do so:
•Create a new terminal
•Add the terminal to a new Node in the Terminal Configuration Centre
•Optional: Set up a Parking Zone and add the terminal to the parking Zone
| Important: All terminals in a parking zone or node must have the same Payment, Article, and Tariff Package (PAT) configuration. |
•Create a Standard CWT configuration
oDownload the Standard Configuration package from our Partner Area
oUnpack the package to a folder on your drive
oCreate the standard configuration that match your hardware. The Zip file contains a User Guide on how to create a working configuration.
oUpdate the Tariff Packages to use unique IDs
| It is important to use Tariff Package IDs and names that are not used elsewhere in you company. |
oCopy the configuration to an SD-card and insert it into the terminal.
•Start the terminal
•Wait for a heartbeat
•Verify that the tariff Packages (commonly 4) are available in the Tariff Packages list page
In this stage, each new package shall be used by only one terminal.
•Upload the configuration file as described in If you already have terminals up and running.
